One Stop Shop
Hydroware develops and manufactures products for modernisation and new installation of lifts. We are your one-stop-shop, capable of supplying everything you require for your lift project when you prefer the convenience of a single partner. Our products are known for their high quality and are based on innovative solutions. All our TractionElite and HydroElite are designed to allow a lift to have the same lifespan as the property in which it resides.
We are proud to offer the long-awaited TractionElite. Hydroware’s appreciated solutions are now available for your traction lift projects. We are opening up to take on your projects by asking us for an offer on the TractionElite. Make sure to use our quotation and order form so we get all the information needed to give you a correct and rapid offer. When the form is filled in correctly, send it to firstname.lastname@example.org.
Unique technology with unique valve
All HydroElite are equipped with a servo valve that makes it possible for the lift to go direct to floor, completely without creeping.
The valve also makes it so that no bypass of the oil at full speed upwards is required. It drastically reduces travel time and energy consumption compared to traditional electronic valves.
TractionElite and HydroElite are Hydroware’s solutions for making lift modernisation as simple as possible. Lift companies and lift owners opting for one of Hydroware’s products, get a lot of benefits from their choice.
Different models of TractionElite and HydroElite drive and control systems
TractionElite is available in MR and MRL configurations.
HydroElite is available as H2 and V5 – VENI, VIDI, MINI and MRL.
MR & MRL
Hydroware’s solution for traction lift modernisation, with or without machine room.
Every benefit that you are used to with Hydroware as a partner, now also for traction lifts.
Low energy consumption
HydroElite VENI takes full advantage of the unique valve.
The system provides an energy consumption that is up to 50% lower than traditional electronic valves.
Low power output
Significantly reduced power demand and low energy consumption.
HydroElite VIDI is equipped with a current-limiting drive and an air-cooled IE2 motor.
For small spaces
HydroElite MINI is used where there is not enough space.
Good when there is too little space on the way to or inside the machine room, to be able to use a normal tank size.
HydroElite MRL is the machine roomless alternative that is increasingly in demand.
Due to several different aspects, it is better to place control and drive systems outside the shaft.
Cylinders for hydraulic lifts
Hydraulic cylinder from COAM.
We supply all parts for lift installations including hydraulic cylinders. We work with COAM as a supplier.
Other lift components
Everything from one supplier
One Stop Shop.
One Stop Shop for all the parts needed for a lift installation. For you, only contact with one supplier is needed.
One for All
When choosing Hydroware, you get one supplier and one control system designed for all of your projects. Our H2 is ONE FOR ALL, as it is designed for both the TractionElite H2 and HydroElite H2.
One shaft installation
One user interface
ONE FOR ALL
Quick and easy installation
Manual drive is possible after only a few hours of installation work, depending on your choice of drive and control system. All our products are pre-assembled, and function tested in our Swedish factories. In addition, the cables are connected. All this together with the simple commissioning enables up to a halving of the installation time compared to traditional systems.
Pre-tested at the factory
All HydroElite and TractionElite are pre-tested on physical lifts in our factories to 100% before delivery. This reduces the risk of possible problems on the construction site while at the same time greatly reducing installation time. Furthermore, the total function is ensured and Hydroware can take responsibility for the entire product and a safe stable function for the entire life of the lift.
Increased capacity and comfort
Already in the design and construction stage, HydroElite drive, and control systems are married together. This contributes to a short reaction time from command to start, which together with the unique valve’s properties increases the elevator’s capacity and comfort.
Commissioning is easily done with the help of a learning journey for the hydraulics and one for the floor plan setting. The system is completely self-learning and self-adjusting. No manual changes are required and the valve’s accuracy and precision when running in to floor increases for each trip.
The lead time for a HydroElite is very short. The standard delivery from the time an order is added for a HydroElite to leave the factory in Alvesta is 4-5 weeks, with a few more weeks for the TractionElite. On request, the HydroElite is available for express delivery in up to 10 days.
The user of the lift receives benefits such as shorter waiting and travel times as well as significantly improved travel comfort. For the property owner, the advantage is primarily shorter downtime, lower power consumption, lower energy consumption and higher reliability. The lift company benefits from the shortened assembly times, reliable delivery and support as well as the simple order handling.
Here is more information about our products and services.