Unique technology with unique servo valve
HydroElite VENI is an integrated drive and control system for hydraulic elevators. It is equipped with Hydroware’s unique valve system which makes it possible for the elevator to go with direct to floor travel, completely without creeping. The valve also does not need to bypass the oil at full speed upwards. It reduces travel time and energy consumption.
HydroElite VENI is available in both H2 and V5 models. H2 is the latest and most innovative lift control system, and it is designed for both the HydroElite H2 and TractionElite H2. With H2, you get one supplier for all your projects, simple installation and a future proof product thanks to our IoT capabilities.
Benefits with H2
When opting for the H2 you get one supplier and one lift controller for all your projects.
H2 is ONE FOR ALL since it is designed for both our TractionElite H2 and our HydroElite H2.
One shaft installation
One user interface
H2 – at a Glance
- CANopen Lift technology
- No floor zone sensors needed
- No limit switches needed
- Automated test procedures
- Innovative pit box
- Simple commissioning
- SIL3 certified Position Supervisor Unit
10 ” touch display
- Easy to navigate
- Language options
- Instruction movies in display
- Training sessions simplified
- Integrated diagnostic tool
- Real time and historical data
- Safety circuit overview
- Full accountability
Stay connected – HydroCloud
- HydroCloud connection
- Always updated documentation
- Remote software updates
- Remote monitoring
- Access from anywhere
- Live internal drawings
- Better planning of maintenance
- Constantly evolving IoT
- Local Wi-Fi enables access from smart devices
Benefits with every HydroElite VENI (H2 and V5)
Low energy consumption
HydroElite VENI takes full advantage of the unique valve. The system provides an energy consumption that is up to 50% lower than traditional electronic valves. HydroElite VENI is equipped with a soft starter and a submerged oil motor.
HydroElite VENI is pre-assembled and function tested in our factory, which shortens the installation time. Commissioning is easily done with the help of a learning journey for the hydraulics and one for the floor plan setting. No manual adjustments are required and the valve accuracy increases for each trip.
Increased capacity and comfort
Direct approach to the floor and the fact that no bypass of the oil is needed, gives shorter travel time and increased travel capacity. In addition, the reaction time from a command to start is very short due to the fact that the entire system is perfectly tuned, which also helps to increase the lift’s capacity and comfort.
No overheated oil
Thanks to the valve’s unique properties, more trips can be made without the oil getting too hot. With a HydroElite VENI, you can often eliminate the risk of overheated oil and the use of energy-intensive oil coolers.
Everything from one supplier
The fact that the drive and control system come from the same supplier provides increased security and easier handling in terms of support, service and guarantees throughout the lifespan of the lift.
Here is more information about our products and services.
Technical overview of HydroElite VENI (H2 and V5)
- EN81-20 / 50 certified: common type certificate A3 / UCM
- Soft starter
- Submerged oil motor
- Unique servo valve
- Direct approach to floor
- No by-pass of the oil at full speed upwards
- Self-learning completely without manual settings
- Precise floor adjustment through a self-adjusting positioning system
Energy and capacity
- Up to 50% energy savings
- 10-50% shorter travel time by eliminating creeping and oil bypass
- 20-40% reduced power consumption
- Faster start and temperature and load independence
- Higher traffic capacity without the need for oil cooling
Open and modular
- Flexible and modular to suit all types of installations
- Direct control, pickup, down or full collective and selectors for several lifts in groups.
- Built-in diagnostic system for efficient maintenance and easy troubleshooting
- Remote fault reporting and service diagnostics – option
Different models of TractionElite and HydroElite drive and control systems
TractionElite is available in MR and MRL configurations.
HydroElite is available as H2 and V5 – VENI, VIDI, MINI and MRL.
MR & MRL
Hydroware’s solution for traction lift modernisation, with or without machine room.
Every benefit that you are used to with Hydroware as a partner, now also for traction lifts.
Low energy consumption
HydroElite VENI takes full advantage of the unique valve.
The system provides an energy consumption that is up to 50% lower than traditional electronic valves.
Low power output
Significantly reduced power demand and low energy consumption.
HydroElite VIDI is equipped with a current-limiting drive and an air-cooled IE2 motor.
For small spaces
HydroElite MINI is used where there is not enough space.
Good when there is too little space on the way to or inside the machine room, to be able to use a normal tank size.
HydroElite MRL is the machine roomless alternative that is increasingly in demand.
Due to several different aspects, it is better to place control and drive systems outside the shaft.
Cylinders for hydraulic lifts
Hydraulic cylinder from COAM.
We supply all parts for lift installations including hydraulic cylinders. We work with COAM as a supplier.
Other lift components
Everything from one supplier
One Stop Shop.
One Stop Shop for all the parts needed for a lift installation. For you, only contact with one supplier is needed.